VANN Bus Power Management System
Products allow for flexibility and ease of system configuration. Our J1939 eliminating jump starting can be easily configured to assure dependability and reliable starting integrity in system.
CAN Bus Current Sensors
Monitors alternator, starter and load currents, communicates directly with the VANN Bus equalizer- water resistant.
| Model | Maximum Current | Output Voltage | Supply Voltage | Supply Current | Weight |
| VSS-C600 | 600 Amps | .5 - 4.5 Vdc | .5 - 4.5 Vdc | 25 ma | < 1.0 lb. |
| VSS-C80 | 80 Amps | .5 - 4.5 Vdc | 4.5 – 5.5 Vdc | 25 ma | < 1.0 lb. |
| VSS-C80/600 | 600 Amps | .5 - 4.5 Vdc | .5 - 4.5 Vdc | 25 ma | < 1.0 lb. |
CAN Bus Voltage/Temperature Sensor
Monitors voltage and temperature at the vehicle's battery post. Communicates directly with the VANN Bus equalizer- water resistant
| Model | Supply Voltage | Supply Current | Output Voltage | Temperature |
| VSS-VT | 4.5 – 10.0 Vdc | 10ma | .5 – 4.5 Vdc | -40 F to + 150 F (-40 C to +65 C) |
Dual Low Voltage Disconnect
Controls 12 volt loads through the CAN bus system allowing for loads to be shed when DC voltage is critical.
| Model | DC Input Vdc | P2 Switch Current | P1 Switch Current | Weight |
| DLVD | 24 Vdc nominal | 33 Amps | 10 Amps | 1.6 lbs. |
Diagnostic Monitoring VANN 70 Series Equalizer
Communicates with vehicle's multiplex system
| Model | Input Voltage | Max Input Current (24 Vdc) |
Output Current | Weight |
| 70-100CAN | 18-32 Vdc | 53 Amps | 0-100 Amps | 7.3 lbs. |
| 70-60CAN | 18-32 Vdc | 32 Amps | 0-60 Amps | 7.0 lbs. |
| 70-80CAN | 18-32 Vdc | 43 Amps | 0-80 Amps | 7.3 lbs. |
Prognostic System Analysis VANN 80 Series Equalizer
Electrical system analysis
State of charge, state of health connection failure and proactive system analysis
| Model | Input Voltage | Max Input Current (24 Vdc) |
Output Current | Dimensions | Weight |
| 80-100 CAN | 18-32 Vdc | 53 Amps | 0-100 Amps | 10.6. H x 8.5. W x 3.6.D | 7.3 lbs |
| 80-60 CAN | 18-32 Vdc | 32 Amps | 0-60 Amps | 10.6. H x 8.5. W x 3.6.D | 7.0 lbs |
| 80-80 CAN | 18-32 Vdc | 43Amps | 0-80 Amps | 10.6. H x 8.5. W x 3.6.D | 7.3 lbs |
VANN Bus Converter Isolator
Provides battery charging and management of two separate battery banks
| Model | Input Voltage | Maximum Output Current | Output Current | Weight |
| 90-60CAN | 18-32 Vdc | 32 Amps | 0-60 Amps for two separate battery banks | 7.5 lbs |
Vanner's policy is one of continuous improvement. We reserve the right to change specifications without notice.
