FAQ for EQUALIZER 70 & 70M-SERIES

1. How do I verify that my equalizer is functioning properly?

• Answer: 1. Measure 24V to ground at the equalizer, note voltage.
• Answer: 2. Measure 12V to ground at the equalizer, note voltage. The 12V output should be half of the 24V voltage with approximately 2 Amps applied.

2. Why is the green LED on my equalizer not on? (Applies to 70M equalizer only)

• Answer: Deutsch connector not connected or pin B of Deutsch connector is not receiving 24VDC.

Copyright Vanner Inc. 2017 [ ISO Certifications and Policies ]